Chigo 2 Ton AC Price in Bangladesh
Updated on: July 25, 2026
Chigo 2 Ton AC for Homes, Offices and Commercial Spaces in Bangladesh
Chigo 2 Ton AC models are designed for customers who need stronger cooling than a typical 1 Ton or 1.5 Ton air conditioner can provide. A 2 Ton unit is commonly considered for larger bedrooms, living rooms, meeting rooms, shops, restaurants and office spaces where room size, occupancy and heat exposure create a higher cooling requirement.
Ponnobd Electronics currently lists two products in this category: a wall-mounted Chigo 2 Ton Split AC and a Chigo 2 Ton Window Type AC. Both models have a nominal cooling capacity of 24,000 BTU, but they differ in installation method, compressor configuration, operating characteristics and listed price. The category was shown as updated on May 24, 2026, and both products were marked out of stock when this content was prepared.
Customers comparing the Chigo 2 Ton AC price in Bangladesh should consider more than the initial purchase price. The correct decision depends on room dimensions, ceiling height, direct sunlight, number of occupants, appliance heat, expected daily operating time, installation requirements and electricity consumption. Reviewing these factors helps determine whether a split or window AC is more suitable for the intended space.
Latest Chigo 2 Ton AC Price List in Bangladesh
The currently displayed Chigo 2 Ton AC prices at Ponnobd Electronics range from BDT 44,000 to BDT 46,000. Only two products are listed in this specific capacity category, so the table includes every model currently shown rather than adding unrelated products.
| Product Name | Product Type and Important Features | Current Price in Bangladesh | Availability |
|---|---|---|---|
| Chigo 2 Ton AC | Wall-mounted split inverter AC, 24,000 BTU, model CS-61V3A-WB156AE2B, remote control and auto-clean filter | BDT 46,000 | Out of Stock |
| Chigo 2 Ton AC Window Type | Window AC, 24,000 BTU, model CW-24CH-B, rotary GMCC compressor and 2,400-watt cooling power input | BDT 44,000 | Out of Stock |
The displayed prices and availability may change as products are restocked or updated. Customers should open the relevant product page and confirm the current price, stock position, installation cost and ordering terms before making a purchase.
Types of Chigo 2 Ton AC Available in Bangladesh
The Ponnobd category includes two fundamentally different air-conditioner configurations. The Chigo split model separates the indoor cooling unit from the outdoor compressor unit, while the window model places the primary components inside one cabinet. Understanding this structural difference is important because it affects installation, indoor noise, appearance, maintenance access and the type of room where the AC can be fitted.
Chigo 2 Ton Split Inverter AC
The wall-mounted Chigo 2 Ton AC is identified on its specification page as a mid-wall split inverter unit. Its indoor section is installed high on a wall, while the compressor and condenser section remains outside the room. This arrangement provides a cleaner indoor appearance and allows the noisier outdoor components to operate away from the occupied area.
The model number displayed for this unit is CS-61V3A-WB156AE2B. Its listed cooling capacity is 6,000 watts, with an operating range of 2,500 to 6,500 watts. The displayed cooling power input is 1,995 watts, with a stated operating range of 700 to 3,000 watts. The product page also lists an EER of 3.01, indoor air circulation of 1,050 cubic metres per hour and indoor sound pressure of approximately 42 to 48 dB(A).
The unit uses R410A refrigerant according to its detailed specification table. Additional listed characteristics include a rotary compressor, remote control, adjustable air control, an auto-clean filter and a nominal 24,000 BTU capacity. Ponnobd indicates a suggested coverage range of approximately 180 to 220 square feet, although actual suitability should be confirmed through a proper cooling-load assessment.
Chigo 2 Ton Window AC
The Chigo 2 Ton Window Type AC combines its evaporator, compressor and condenser arrangement within a single cabinet. It normally requires a suitable opening in a wall or window structure. This configuration can make installation more direct in rooms that already have an appropriate mounting point, but the installation area must be strong enough to support the unit safely.
The model number shown for this product is CW-24CH-B. It has a listed cooling capacity of 24,000 BTU per hour, a 2,400-watt cooling power input, a 10.9-amp operating current and an EER of 2.75. Ponnobd lists a normal coverage area of approximately 220 square feet, indoor airflow of 1,050 cubic metres per hour and an indoor noise level of approximately 58 to 60 dB.
The product specification identifies a rotary GMCC compressor associated with Toshiba and lists R410 or R22 under refrigerant information. Because the page refers to more than one refrigerant option, customers should verify the exact refrigerant supplied with the available unit before ordering or arranging future maintenance.
Chigo 2 Ton Split AC versus Window AC
Installation and Room Appearance
A split AC is usually preferred when customers want a wall-mounted indoor unit with the compressor positioned outside the room. The indoor section takes up relatively little wall space and does not require a large window opening. Installation involves refrigerant piping, drainage, electrical connections and secure placement of the outdoor unit.
A window AC places the full cooling system in one cabinet. It requires a correctly sized wall or window opening and proper external support. This can be practical for certain shops, offices, guard rooms or older buildings where a window-AC opening already exists.
Operating Sound
The split model’s specification shows a lower indoor sound-pressure range than the window model. This is expected because the split configuration keeps the compressor outdoors. Customers planning to use an AC in a bedroom, conference room or work area where lower indoor noise is important may therefore find the split configuration more appropriate.
Energy Management
The listed Chigo split model uses inverter technology. An inverter system can vary compressor output instead of operating only through repeated full-power start and stop cycles. This allows the system to respond more gradually as the room approaches the selected temperature.
The actual electricity cost will depend on operating temperature, insulation, outdoor heat, room load, compressor condition, maintenance and daily usage. Customers should compare the model’s input power and efficiency data rather than assuming that every 2 Ton AC consumes the same amount of electricity.
Maintenance Access
A window AC keeps most major components together, which can make the unit accessible after removal from its mounting point. A split system separates the indoor and outdoor components, so servicing may require access to both locations. In either case, filter cleaning, drainage inspection, coil cleaning and refrigerant-pressure checks should be completed when needed.
What Room Size Is Suitable for a Chigo 2 Ton AC?
The two Ponnobd product pages indicate approximate coverage between 180 and 220 square feet for the split model and around 220 square feet under normal conditions for the window model. These figures provide a useful initial reference, but floor area alone cannot determine the exact capacity requirement.
A room with a high ceiling contains more air than a room with a standard ceiling. Large glass windows, west-facing walls, direct roof exposure and weak insulation can also increase heat gain. A shop with customers entering frequently may require more cooling than a private room of the same size. Computers, lighting, kitchen equipment and other appliances can add further heat.
An oversized AC may reach the selected temperature too quickly without managing humidity effectively, while an undersized AC may run continuously and still fail to provide sufficient comfort. A technician should therefore inspect the room when the installation involves unusual dimensions, extensive glass, heavy commercial use or a large number of occupants.
Key Features to Consider When Buying a Chigo 2 Ton AC
Cooling Capacity and BTU
Both products in this category are rated at 24,000 BTU. BTU indicates the amount of heat an air conditioner can remove within a specified period. The rating should be matched to the room’s calculated cooling load rather than selected only because a higher capacity appears more powerful.
Inverter or Fixed-Speed Operation
The Chigo wall-mounted model is described as an inverter unit, while the window product page does not identify the model as inverter. Customers expecting long daily usage should assess compressor control, input-power data and room conditions carefully. Purchase price and estimated operating cost should be considered together.
Power Consumption
The split model lists a nominal cooling power input of 1,995 watts, while the window model lists 2,400 watts. These figures are specification values rather than a guaranteed electricity-bill calculation. Real consumption changes as the compressor responds to temperature, humidity, room load and thermostat settings.
Efficiency Rating
The split model displays an EER of 3.01 and the window model displays an EER of 2.75. EER compares cooling output with electrical input under specified test conditions. A higher rating generally indicates more cooling output for the stated energy input, but customers should compare units measured under equivalent standards.
Refrigerant Type
The split product specification lists R410A refrigerant. The window model lists R410 and R22, so the exact supplied configuration should be confirmed. Refrigerant type affects servicing requirements, operating pressure and the availability of compatible maintenance equipment.
Compressor and Outdoor Placement
The window model lists a rotary GMCC compressor, while the split model lists a rotary compressor with its own technical model reference. For split installation, the outdoor unit should have sufficient ventilation and a secure mounting location. Restricted airflow around the condenser can reduce cooling performance and place unnecessary strain on the system.
Chigo 2 Ton AC Price in Bangladesh Price Table (BD)
Prices auto-update from product pages.| # | Product | Price | Availability | Action |
|---|---|---|---|---|
| 1 | Chigo 2 Ton AC | BDT 46,000 | Out of Stock | View |
| 2 | Chigo 2 Ton AC Window Type | BDT 44,000 | Out of Stock | View |
Note: Price & stock may change. Always confirm on the product page before ordering.
Airflow and Fan Performance
Both product specifications list indoor airflow of 1,050 cubic metres per hour. Strong airflow helps distribute conditioned air, but the room layout and louvre direction also matter. Furniture, partitions, curtains and poor indoor-unit placement can block circulation and create uneven cooling.
Noise Level
The split model lists indoor sound pressure between 42 and 48 dB(A), while the window unit lists approximately 58 to 60 dB. Noise tolerance varies by environment, so a unit for a bedroom or meeting room may require a different decision from one intended for a shop or operational workspace.
Electrical Capacity
A 2 Ton AC requires a correctly rated electrical circuit, suitable cable, protective breaker, dependable earthing and stable voltage. The window model lists an operating current of 10.9 amps, while the split model displays a maximum current of 15 amps in its detailed specifications. A qualified electrician should check the installation point before connection.
Installation Materials and Charges
The product price may not represent the complete installed cost. Buyers should confirm the included pipe length, drainage pipe, electrical cable, wall bracket, mounting work, transport, core cutting and any charge for additional materials. These requirements can differ significantly between split and window installations.
Warranty and Service Confirmation
Warranty information should be checked directly on the relevant product page or with Ponnobd before payment. Customers should confirm which components are covered, how long each type of coverage remains valid, whether installation by an approved technician is required and which documents must be retained for a service claim.
Chigo 2 Ton AC Price Range in Bangladesh
Based on the two models listed by Ponnobd Electronics, the current Chigo 2 Ton AC price in Bangladesh ranges from BDT 44,000 to BDT 46,000. The window model has the lower displayed price at BDT 44,000, while the split inverter model is listed at BDT 46,000.
The difference is associated with their separate configurations and specifications. The split unit includes an indoor wall-mounted section, an outdoor section and inverter compressor control. The window unit uses an integrated cabinet and has a different efficiency rating, power input and installation method.
Prices can change due to stock status, import costs, model revisions, seasonal demand and promotional updates. Both products were marked out of stock at the time of review, so the displayed amount should be treated as the latest website listing rather than a guaranteed restock price.
Compare Other Chigo AC Capacities
A 2 Ton model is not necessary for every room. Customers furnishing a smaller bedroom or compact office can compare the Chigo 1 Ton AC range. A correctly sized smaller unit may offer more balanced cooling where the heat load does not justify 24,000 BTU.
For larger residential rooms or commercial spaces, the Chigo 2.5 Ton AC category provides a higher-capacity alternative. Businesses requiring ceiling-mounted airflow can review the Chigo 3 Ton AC options.
Substantially larger halls, restaurants, offices or retail spaces may require a Chigo 4 Ton AC or a Chigo 5 Ton AC. The complete Chigo AC price list in Bangladesh can help customers compare the brand’s available capacities and configurations in one place.
How to Use a Chigo 2 Ton AC Efficiently
Efficient operation begins with selecting the correct capacity and completing the installation properly. Doors and windows should remain closed while the AC is running, and major air leaks should be reduced. Curtains or blinds can help limit solar heat entering through large windows.
The temperature should be set at a comfortable level rather than an unnecessarily low setting. A ceiling fan can help circulate conditioned air through a larger room, especially where furniture or partitions interrupt the natural airflow path.
The indoor filter should be inspected and cleaned regularly. Dust accumulation restricts airflow, reduces cooling performance and can cause the unit to operate for longer periods. The drainage system should also remain clear so that condensed water can leave the indoor section correctly.
The outdoor condenser requires open airflow around its intake and discharge areas. Dust, debris or an enclosed installation position can prevent effective heat rejection. Periodic professional inspection can identify coil contamination, refrigerant leakage, loose electrical connections and unusual compressor behaviour before they develop into larger problems.
Common Questions About Chigo 2 Ton AC
What is the current Chigo 2 Ton AC price in Bangladesh?
Ponnobd currently displays BDT 46,000 for the Chigo 2 Ton Split AC and BDT 44,000 for the Chigo 2 Ton Window Type AC. Both models are marked out of stock, and the price should be reconfirmed when stock returns.
Is a Chigo 2 Ton AC suitable for a 220-square-foot room?
The listed coverage information reaches approximately 220 square feet under suitable conditions. Actual capacity requirements can increase when the room has direct sunlight, a high ceiling, poor insulation, frequent door opening, heavy appliance use or many occupants.
Which Chigo 2 Ton AC is quieter?
The split model has a listed indoor noise range of 42 to 48 dB(A), compared with approximately 58 to 60 dB for the window model. Based on those specifications, the split unit is the quieter indoor option.
Which model has the lower listed electricity input?
The split inverter model lists a nominal cooling power input of 1,995 watts, while the window model lists 2,400 watts. Actual electricity consumption will vary according to operating conditions and usage.
Can these models be ordered while they are out of stock?
Ordering or advance-booking availability is not confirmed on the category page. Customers should contact Ponnobd to ask about restocking, updated prices, alternative models and delivery arrangements.
Why Consider Buying a Chigo 2 Ton AC from Ponnobd Electronics?
Ponnobd provides separate product pages containing prices, availability, model numbers and detailed technical specifications. This allows customers to compare the split and window configurations before contacting the store.
The product pages display EMI availability and mention cash-on-home-delivery arrangements in Dhaka with applicable charges. They also mention courier delivery outside Dhaka with applicable charges. Customers should confirm eligibility, total delivery cost, installation requirements and current commercial terms before placing an order.
For stock confirmation, product guidance or ordering information, customers can use the verified Ponnobd Electronics contact page. Providing the product name, model number, room size and installation location can help the sales team respond more accurately.
Buy Chigo 2 Ton AC at the Current Price in Bangladesh
The Chigo 2 Ton Split AC is the more suitable option for customers prioritising inverter operation, lower listed indoor noise and a wall-mounted appearance. The Chigo 2 Ton Window Type AC may suit customers who have an appropriate structural opening and prefer a single-cabinet cooling system at a lower displayed purchase price.
Before choosing either model, measure the room, assess sunlight and occupancy, review the electrical supply and calculate the full installation cost. Since both products are currently marked out of stock, confirm the latest Chigo 2 Ton AC price in Bangladesh and expected availability directly with Ponnobd Electronics before making a purchase decision.